Home > Products > NC Milling machine > BT-1200
Products
NC Milling machine
Standrd Accessories

1.LNC-M528A controller
2.X,Y,Z-axis Ball screw
3.Tool box and tools
4.Working light
5.Draw bar(manual)
6.Tapping Equipment of spindle
7. X, Y, Z-axis motor automatic feed
8. X axis roll cover
9. X, Y-axis guideway cover
10.Heat exchanger
11.Alarm light
12.Water tank covered

Optional Accessories
1. Transformer
2. Draw bar (pneumatic)
3. Siemens 808D control
Specification
MODEL BT-1200
SPINDLE Spindle speed 60-3600 rpm
Spindle taper NST#40 / BT40
Swivel angle of head 45°(R&L)
Overarm travel 140 mm
Quill feed per revolution of spindle 0.035 / 0.07 / 0.14
TABLE Table size 1250 X 500 mm
T-slot (width X no X distance) 18 X 5 X 96 mm
Table elevating speed 20 m / min
Maximun table load 1000 kgs
TRAVEL X,Y,Z-axis 1200 X 500 X 500 mm
Spindle nose to table surface 0-650 mm
Spindle center to column slide ways 570 mm
FEED Slide feedrate X,Y,Z Box Way
Cutting feedrate X,Y,Z 2 / 2 / 2 m /min
Rapid feedrate X,Y,Z 10 /10 /8 m /min
MOTORS Spindle motor 3.7 kw
Z axis drive motors 3 kw
X,Y axis drive motors 2 kw
Lubricating pump 150 w
Electromagnetic pump 40 w
Coolant pump 1270 w
OTHER Machine measurement(L X W X H) 2850 X 2302 X 2295 mm
Packing measurement(L X W X H) 3000 X 2300 X 2300 mm
Net weight 4430 kgs
Gross weight 4730 kgs
* All specification , dimension and design characteristics SHOUn in this catalogue are subject to change without notice.