Home > Products > Vertical machining center > MT-540V/VS
Products
Vertical machining center
 
Features
1. The ATC of supporting seat and column are one-piece. It is stability when tool change tool.
2.Linear Guideway and C3 Ball Screw on X,Y,Z - axis
3.The machine processing fast, high precision, three axes rapid feedrate 48m/min, it is save time to achieve economic efficiency.
4.Applicable Industries: 3C industries, Communications industry, Molds, Automotive and motorcycle parts.
 
Standrd Accessories
1. Full-closed splash guard 2. Automatic power off
3. Oil skimmer system 4. Water gun and air gun
5. Chips flush coolant system 6. Tools box
7. Work lamp 8. Arm type ATC with 20 tool capacity
9. Automatic lubrication system 10. Heat exchanger
11. Alarm light 12. Screw type chip conveyer
13. Spindle oil cooler system 14. Spindle speed 10000rpm
15. MITSUBISHI controller FCA70P  
Optional Accessories
1.FANUC system controller 2.SIEMENS system controller
3.Direct type Spindle 12,000/15,000 RPM 4.Built type Spindle 20,000/24,000 RPM
5.Coolant through spindle 6.Air conditioner
7.Transformer 8.Voltage regulator
9.Flat type chip conveyer 10.CE mark
11.3-Axes optical scale 12.Breakage detection system
13.Oil mist collector 14.Inverter ATC System
 
Specification
Model MT-540 V MT-540 VS
Table Size mm 650x450 650x450
T-slot (width x no x distance) mm x T 18x5x90 18x5x90
Maximun table load kgs 200 200
Travel X, Y, Z -axis mm 550x430x450 550x430x450
Table top surface to spindle nose mm 120-570 120-570
Distance between spindle center and column surface mm 490 490
Linear guideway type ( X / Y / Z-axis ) mm 25/25/30 25/25/30
Ball screw ( X / Y / Z-axis ) mm ∅28/∅28/∅32 ∅28/∅28/∅32
Spindle Spindle holder   BELT DIRECT
Taper   BT40 BT40
Diameter mm 60 60
Spindle speed rpm 10000 10000
Feed Cutting feedrate X/ Y/ Z (G01) m / min 24/24/24 24/24/24
Rapid feedrate X/ Y/ Z (G0) m / min 48/48/48 48/48/48
ATC Type   ARM ARM
Max. tool Dia mm ∅75 /∅150 ∅75 /∅150
Max. tool length mm 200 200
Max. tool weight kgs 7 7
Tool type   BT40 BT40
Tool magazine capacity T 20 20
Motors Spindle motor (Cont./30 min) kw 5.5/7.5 5.5/7.5
X/ Y/ Z -Axis kw 1.5/1.5/3.0(Mitsubishi)
1.4/1.4/3.0 (FANUC)
1.5/1.5/3.0(Mitsubishi)
1.4/1.4/3.0(FANUC)
Coolant pump kw 0.75 0.75
Other Machine Space ( L x W ) mm 1800x1860 1800x1860
Coolant tank capacity L 220 220
Net weight kgs 3600 3600
* All specification , dimension and design characteristics shown in this catalogue are subject to change without notice.