Home > Products > NC Milling machine > SZ-2200H-VSD-NC
Products
NC Milling machine
Features
Control Panel
X,Y axis manual control then automatic feed
Z axis Counter weight balance (500kgs)
Standrd Accessories

1.Siemens 808D control
2.X, Y, Z-axis Ball screw
3.Tool box and tools
4.Working light
5.Draw bar.(manual)
6.Tapping Equlpment of spindle
7. X, Y, Z-axis motor automatic feed
8. Y axis guideway cover
9. Heat Exchanger
10.Alarm light
11.Support
12.Arbor of Horizontal
13.Z axis Counter weight balance

Optional Accessories
1. Transformer
2. Draw bar(pneumatic)
3.Coolant system with chip tray
4.X Axis Extend to 950mm Travel
Specification
MODEL SZ-2200H-VSD-NC
SPINDLE Spindle speed 60-3600 rpm
Spindle speed 75-1050 rpm
Spindle taper NST 40 / BT 40
Swivel angle of head 45°(R&L)
Overarm travel 140 mm
Quill feed per revolution of spindle 0.035 / 0.07 / 0.14
TABLE Table size 1350 X 305 mm
T-slot(width X no X distance) 16 X 3 X 63 mm
Maximun table load 500 kgs
TRAVEL X,Y,Z-axis 800 X 400 X 400 mm
Spindle nose to table surface 0-530 mm
Spindle center to column slide ways 150-600 mm
FEED Slide feedrate X / Y / Z Box Way
Cutting feedrate X / Y / Z 2.4 / 2.4 / 2.4 m /min
Rapid feedrate X / Y / Z 3 / 3 / 3 m /min
MOTORS Spindle motor of Vertica 3.7 kw
Spindle motor of Horizontal 3.7 kw
X,Y,Z axis drive motors 1 / 1 / 2 kw
Lubricating pump 150 w
Electromagnetic pump 40 w
Coolant pump 95 w
OTHER Machine measurement(L X W X H) 2150 X 2030 X 2400 mm
Paking measurement(L X W X H) 2300 X 1760 X 2200 mm
weight 3000 kgs
* All specification , dimension and design characteristics SHOUn in this catalogue are subject to change without notice.