Home > Products > Vertical turret milling machine > SZ-A8-V / SZ-A8-VS
Vertical turret milling machine
Intermittence Lubrication system
Precision ball screw
Pre-loaded with double nuts C5 class precision ball screw is installed on X & Y axes ensuring the transmission quality- small backlash & fine positioning.
Lubrication oil control valve
Pressure-reserved lubrication oil control valves are installed as standard to control lubrication oil supply as even as possible to ball screw, Gear and 3 axes.
Standrd Accessories
1. Tool box and tools
2. Working light
3. Draw bar (manual)
4. Tapping equipment of spindle
5. Chip cover on y axis (rubber)
Optional Accessories
1. Digital readout
2. Draw bar (pneumatic)
3. Coolant system
4. Table splash guard
5. Chip cover on y axis (stainless)
6. X power feed
7. Y power feed
Model SZ-A8-V SZ-A8-VS
Main Spindle Spindle speed 75~3600rpm 16 speed 60~3600 variable speed
Spindle taper NST#40 NST#40
Angle of tilt 45° (R&L) 45° (R&L)
Overarm travel 450mm 450mm
Quill travel 140mm 140mm
Distance of Spindle to table 0~480mm 0~480mm
Distance of Spindle center to column surface 165~615mm 165~615mm
Quill feed per revolution of spindle 0.035/0.07/0.14mm 0.035/0.07/0.14mm
Table Working table area (LxW) 1200 x 260mm 1200 x 260mm
Longitudinal travel manual/auto 650mm 650mm
Cross travel 350mm 350mm
Vertical travel of knee 400mm 400mm
T-slots 16 x 3 x 63mm 16 x 3 x 63mm
Cutting federate (X) -- --
Rapid traverse (X) -- --
Table elevating speed 1150mm/ min 1150mm/ min
Motor Main spindle 3.7kw (5HP) 3.7kw (5HP))AC
Table elevating 0.75kw (1HP) 0.75kw (1HP)
Lubricating pump 150w 150w
Electromagnetic pump 40w 40w
Machine Weight & Packing Machine measurement (LxWxH) 1800 x 1640 x 2210mm 1800 x 1640 x 2260mm
Packing measurement (LxWxH) 1700 x 1900 x 2200mm 1700 x 1700 x 2200mm
Net weight 1700kgs 1750kgs
Gross weight 1800kgs 1850kgs
* All specification , dimension and design characteristics SHOUn in this catalogue are subject to change without notice.